The EVO 4-120 is our warmest recommendation for all surfaces with a maximum depth of 120cm. The achieved lighting intensity is in the maximum of what we can still recommend without separate CO₂ feed. With 250W and 696µmol/s per single light, impressive illumination intensities can be achieved with two lights on an area of 1.2×1.2m. Due to the secondary optics, the possibility to adjust the angle of inclination and the correct positioning, you can achieve high illumination values even in the furthest corners without losing homogeneity. Unlike other lights, you don’t have a central hotspot and distribute the light more evenly over your plants. The possibility of optional dimming allows you to respond individually to the needs of your plants.
- Recommended lighting solution for areas with 120cm depth or 120 tents
- Designed for use without additional CO₂
- 255W and 696µmol/s
- Impressive illumination intensity when using 2 luminaires on 120x120cm
- Tilting of 11° allows optimal steering of the beam pattern
- Highest possible homogeneity at short distance and illumination intensity
- No central hotspot, the light is distributed evenly over the area
- Optional dimming allows the intensity to be adjusted to the growth stage
- Due to a wide variety of installation options, the various cables and other accessories are available separately and are not included
Efficiency is not just a number in the data sheet…
Of course, with the EVO-Series, we offer an advanced efficiency of more than 3µmol/J at module level. However, much more attention was paid to the yield per area and time during the development. In countless empirical trials with cannabis and other plants, the spectrum was optimized as best as possible. The resulting broadband light spectrum extends beyond the conventional PAR range and offers a Far Red to Red ratio that positively influences photo-morphogenesis, and thus also the quality and quantity of the harvest.
Protection and light control…
In the development of the EVO series, the protective and light-directing secondary optics were optimized to the geometric dimensions of the luminaire. This results in an incredibly homogeneous illumination with the best light intensity (PPFD). The asymmetric secondary optics also minimize photon transport losses to the plants and protect the Leds from the environmental influences to which the luminaire is exposed during plant cultivation. Sulfur and other chemical substances cannot penetrate to the LED. Thus, oxidation of the led chip reflector is prevented. The optics can be easily cleaned. The protection and the possibility of cleaning guarantee you a constant light output for many years.
From an almost unmanageable selection of Leds which are available on the market, we have selected only the best for you. For red and far-red Leds, we have chosen, as in years past, the latest OSRAM High Power Leds. For white LEDs we were convinced by the patented WICOP technology from Seoul Semiconductor. The LEDS with this technology are characterized by the renunciation of lead frames and silver by special robustness with best efficiency.
Each model of the EVO series is “ready-to-dim”. This means that the luminaire is compatible with the typical control systems used in greenhouse technology.
Alternatively, you can retrofit the luminaire with magnetic dimmer or Bluethooth dimmer.
Compared to rotary potentiometers, our solutions work wear-free and humidity and water cannot harm them.
Professionalism starts with the cable….
In the EVO series, all connectors are made with high quality waterproof connectors, which have been established in commercial horticulture over the past decades. All accessories offered by us are designed for the harsh greenhouse environment. Thus, you can easily and safely configure your system, dim or connect to a “daisy-chain” according to your ideas.
Even if our lights are a little higher at first glance, in practical use, quite a bit of height can be saved. In most grow rooms, filters and ventilation systems are mounted on the ceiling. With our EVO series, the required equipment can be positioned between the lights and no cm of usable height is lost. Lighting systems from other manufacturers have to be mounted below the ventilation system due to their design. This wastes significantly more space. This applies both to small grow tents but also to large professional installations.
Power Cable not included!